Overcoming oxygen inhibition in UV photolithography for the fabrication of low-loss polymer waveguides.

Perfluorinated acrylate polymer materials exhibit low absorption loss at 1310 and 1550 nm, but molecular oxygen inhibits their photocuring. We propose a novel, to our knowledge, UV photolithography method incorporating a pre-exposure process for fabricating low-loss perfluorinated acrylate polymer waveguides. During the pre-exposure process, a partially cured thin layer forms on the core layer, effectively overcoming oxygen inhibition in subsequent lithography. Furthermore, the functional group contents of the polymerized materials were characterized by a Raman spectrometer to analyze the development reaction under the pre-exposure layer. Utilizing this improved method, we fabricated a straight waveguide with a length of 21 cm. The experiments showed that the propagation losses are 0.14 dB/cm at 1310 nm and 0.51 dB/cm at 1550 nm. The inter-channel cross talk for a core pitch of 250 µm was measured as low as -49 dB at 1310 nm. Error-free NRZ data transmission over this waveguide at 25 Gb/s was achieved, showcasing the potential in optical interconnect and communication applications.

Vibration-insensitive polarimetric fiber optic current sensor based on orbital angular momentum modes in an air-core optical fiber.

Current or magnetic field sensing is usually achieved by exploiting the Faraday effect of an optical material combined with an interferometric probe that provides the sensitivity. Being interferometric in nature, such sensors are typically sensitive to several other environmental parameters such as vibrations and mechanical disturbances, which, however, inevitably impose the inaccuracy and instability of the detection. Here we demonstrate a polarimetric fiber optic current sensor based on orbital angular momentum modes of an air-core optical fiber. In the fiber, spin-orbit interactions imply that the circular birefringence, which is sensitive to applied currents or resultant magnetic fields, is naturally resilient to mechanical vibrations. The sensor, which effectively measures polarization rotation at the output of a fiber in a magnetic field, exhibits high linearity in the measured signal versus the applied current that induces the magnetic field, with a sensitivity of 0.00128 rad/A and a noise limit of 1×10-5/H z. The measured polarization varies within only ±0.1% under mechanical vibrations with the frequency of up to 800 Hz, validating the robust environmental performance of the sensor.

Distributed optical fiber magnetic field sensor based on polarization-sensitive OFDR.

A distributed optical fiber magnetic field sensor based on a polarization-sensitive optical frequency domain reflectometer (POFDR) is proposed. It extracts the accumulated Faraday rotation by combining the Stokes vectors and the backward Mueller matrices from the measured states of polarization (SOPs) and obtains the magnetic field component. This method avoids adjusting the input polarization during the magnetic field sensing process. It overcomes the drawback of the conventional POFDR scheme, which requires at least two sets of different input SOPs for each sensing. Finally, the aforementioned effectiveness has been experimentally verified by using a single-mode sensing fiber. The results show that the sensor has good repeatability and linearity. The measurement error of the magnetic field sensor is 19.4 mT. The measured magnetic field variations agree with the applied ones with similarities higher than 0.98.

Novel and recurrent variants in PAX6 in four patients with ocular phenotypes from Southeast Asia.

Aniridia is an autosomal dominant condition characterized by the complete or partial absence of the iris, often with additional presentations such as foveal hypoplasia, nystagmus, cataract, glaucoma and other ocular abnormalities. Most cases are caused by heterozygous mutations in the paired box 6 gene (PAX6), which codes for a transcription factor that regulates eye development. Four patients from our hospital who presented with ocular phenotypes were recruited for research sequencing with informed consent. Sanger sequencing of PAX6 coding exons or exome sequencing was performed on genomic DNA from venous blood samples. Variants in PAX6 were identified in the four patients. Two variants are recurrent single-nucleotide substitutions - one is a substitution found in a patient with bilateral aniridia, whereas the other is a splice variant in a patient with nystagmus and neuroblastoma. The other two variants are novel and found in two patients with isolated aniridia. Both are small duplications that are predicted to lead to premature termination. For the recurrent variants, the comparison of phenotypes for patients with identical variants would shed light on the mechanisms of pathogenesis, and the discovery of two novel variants expands the spectrum of PAX6 mutations.

Heterogeneous integrated optical fiber with side nickel core for distributed magnetic field sensing.

A design of a heterogeneous integrated optical fiber with side nickel core (SNCF) has been proposed and demonstrated for distributed fiber-optic magnetic field sensing. Experimental results show that magnetic properties of nickel can be preserved well after the high temperature drawing process. The functionality of the SNCF has been well verified, with the sensitivity for DC magnetic field being up to -2.42 µÎµ/mT (below 8 mT). Besides, the SNCF finally presents magnetostriction saturation under a certain magnetic field, which agrees with the simulation. The proposed direct thermal drawing method to produce metal-heterogeneous integrated optical fiber paves the way for a simple and scalable means of incorporating metallic materials into fibers, as well as providing a promising candidate for long-distance distributed magnetic field sensing.

Towards high-sensitivity and high-accuracy forward Brillouin scattering-based optomechanical temperature sensing in thin-diameter fibers.

We numerically and experimentally demonstrated a high-sensitivity and high-accuracy temperature sensor based on guided acoustic radial modes of forward stimulated Brillouin scattering (FSBS)-based optomechanics in thin-diameter fibers (TDF). The dependence of the FSBS-involved electrostrictive force on the fiber diameter is systematically investigated. As the diameters of the fiber core and cladding decrease, the intrinsic frequency of each activated acoustic mode and corresponding FSBS gain are expected to be accordingly increased, which benefits the significant enhancement of its temperature sensitivity as well as the optimization of the measurement accuracy. In validations, by utilizing TDFs with fiber diameters of 80 µm and 60 µm, the proof-of-concept experiments proved that sensitivities of the TDF-based FSBS temperature sensor with radial modes from R0,4 to R0,15 increased from 35.23 kHz/°C to 130.38 kHz/°C with an interval of 8.74 kHz/°C. The minimum measurement error (i.e., 0.15 °C) of the temperature sensor with the 60 µm-TDF is 2.5 times lower than that of the 125 µm-SSMF (i.e., 0.39 °C). The experimental and simulated results are consistent with theoretical predictions. It is believed that the proposed approach with high sensitivity and accuracy could find potential in a wide range of applications such as environmental monitoring, chemical engineering, and cancer detection in human beings.

Two-photon 3D printing diaphragm-integrated ring waveguide coupler for ultrasound detection.

We demonstrate a diaphragm-integrated ring waveguide coupler fabricated by the two-photon direct laser wring technique as an ultrasonic sensor, which is integrated on an optical fiber tip. The device consists of a micro-ring waveguide with a diameter of 5 µm functionalized as an optical fiber tip light reflection mirror and a straight waveguide connecting a diaphragm. The evanescent field coupling can be realized between the two waveguides, and the coupling efficiency can be changed due to the variation of the coupling gap induced by ultrasound. Accordingly, the light reflection can be changed. Based on the plate vibration theory, the vibration frequency can be changed through optimizing the diaphragm size. The experiments show that the device exhibits a high sensitivity and low noise equivalent acoustic signal level of 1.07 mPa/Hz1/2 at 100 kHz, which has great potential in various acoustic wave sensing applications.

Low loss side-polished pumping coupler for high order OAM modes amplification.

An all-fiber fiber coupler was demonstrated for pumping orbital angular momentum (OAM) modes amplification, which was fabricated by side-polishing and bonding a ring-core erbium-doped fiber (RC-EDF) and a pre-tapered side-polished single-mode fiber (SMF). With the selected phase-matching condition at 976 nm, the pumping laser was coupled into the RC-EDF from the SMF with optimized high efficiency, whereas the 1st to 3rd-order OAM mode signals were transmitted with the low insertion loss in the RC-EDF over a broadband wavelength range from 1530 to 1565 nm. This all-fiber wavelength division multiplexing coupler was optimized by the polished length and depth of the two coupled fibers. The insertion loss for the OAM signal modes was obtained lower than 0.58 dB with the pump power coupling ratio of above 90%. The proposed side-polished pumping coupler technique can ensure high-order OAM modes amplification, paving the way for the all-fiber optical amplifier in high-capacity modal-division multiplexing fiber communication systems.

Data-Class-Specific All-Optical Transformations and Encryption.

Diffractive optical networks provide rich opportunities for visual computing tasks. Here, data-class-specific transformations that are all-optically performed between the input and output fields-of-view (FOVs) of a diffractive network are presented. The visual information of the objects is encoded into the amplitude (A), phase (P), or intensity (I) of the optical field at the input, which is all-optically processed by a data-class-specific diffractive network. At the output, an image sensor-array directly measures the transformed patterns, all-optically encrypted using the transformation matrices preassigned to different data classes, i.e., a separate matrix for each data class. The original input images can be recovered by applying the correct decryption key (the inverse transformation) corresponding to the matching data class, while applying any other key will lead to loss of information. All-optical class-specific transformations covering A → A, I → I, and P → I transformations using various image datasets are numerically demonstrated. The feasibility of this framework is also experimentally validated by fabricating class-specific I → I transformation diffractive networks and is successfully tested at different parts of the electromagnetic spectrum, i.e., 1550 nm and 0.75 mm wavelengths. Data-class-specific all-optical transformations provide a fast and energy-efficient method for image and data encryption, enhancing data security and privacy.

Novel Variants and Clinical Characteristics of 16 Patients from Southeast Asia with Genetic Variants in Neurofibromin-1.

Neurofibromatosis type 1 (NF1) is one of the most common inherited disorders. It is caused by mutations in the neurofibromin-1 gene ( NF1 ) and affects the formation and growth of nerve tissues. More than 3,600 pathogenic variants in the NF1 gene have been identified from patients with most of the germline variants are from the Western populations. We found 16 patients (15 Chinese and 1 Asian Indian) who had heterozygous variants in NF1 through targeted next-generation sequencing. There were 15 different variants: 4 frameshift, 4 nonsense, 5 missense, and 2 splice variants. One nonsense variant and three frameshift variants had never been reported in any population or patient database. Twelve of the 16 patients met the NF1 diagnostic criteria, and each was found to have a pathogenic or likely pathogenic variant. Three different missense variants of unknown significance were discovered in the other four patients who did not meet NF1 diagnostic criteria. Our findings add four novel variants to the list of genetic mutations linked to NF1's various clinical manifestations.

Role of cardiac mitofusins in cardiac conduction following simulated ischemia-reperfusion.

Mitochondrial dysfunction induced by acute cardiac ischemia-reperfusion (IR), may increase susceptibility to arrhythmias by perturbing energetics, oxidative stress production and calcium homeostasis. Although changes in mitochondrial morphology are known to impact on mitochondrial function, their role in cardiac arrhythmogenesis is not known. To assess action potential duration (APD) in cardiomyocytes from the Mitofusins-1/2 (Mfn1/Mfn2)-double-knockout (Mfn-DKO) compared to wild-type (WT) mice, optical-electrophysiology was conducted. To measure conduction velocity (CV) in atrial and ventricular tissue from the Mfn-DKO and WT mice, at both baseline and following simulated acute IR, multi-electrode array (MEA) was employed. Intracellular localization of connexin-43 (Cx43) at baseline was evaluated by immunohistochemistry, while Cx-43 phosphorylation was assessed by Western-blotting. Mfn-DKO cardiomyocytes demonstrated an increased APD. At baseline, CV was significantly lower in the left ventricle of the Mfn-DKO mice. CV decreased with simulated-ischemia and returned to baseline levels during simulated-reperfusion in WT but not in atria of Mfn-DKO mice. Mfn-DKO hearts displayed increased Cx43 lateralization, although phosphorylation of Cx43 at Ser-368 did not differ. In summary, Mfn-DKO mice have increased APD and reduced CV at baseline and impaired alterations in CV following cardiac IR. These findings were associated with increased Cx43 lateralization, suggesting that the mitofusins may impact on post-MI cardiac-arrhythmogenesis.

Disordered mullite grains in a sapphire-derived fiber for high-temperature sensing.

In this study, a sapphire-derived fiber (SDF)-based Fabry-Pérot interferometer (FPI) is proposed and experimentally demonstrated as a high-temperature sensor using the arc discharge crystallization process, forming a region with disordered mullite grains. This shows that the disordered mullite grains are related to the gradual temperature distribution during the arc discharge process, which results in a larger refractive index (RI) modulation of the SDF near the fusing area, forming a reflection mirror. An FPI was obtained by combining the optical fiber end facet. Considering the high-temperature resistance of the fiber, the fabricated FPI was used for high-temperature sensing. This shows that the device can operate at temperatures of up to 1200 °C with a sensitivity of 15.47 pm/°C, demonstrating that the proposed devices have potential applications in high-temperature environments.

Microbubble-based optical fiber Fabry-Perot sensor for simultaneous high-pressure and high-temperature sensing.

An all-silica Fabry-Perot interferometer (FPI) based on a microbubble for high-pressure and high-temperature measurements is proposed and demonstrated. The microbubble-based air cavity is fabricated using a hollow silica tube and a single-mode optical fiber for pressure sensing. The suitable thickness between the two end faces of the microbubble enables the silica cavity to be used for temperature sensing. The wavelength shift of the reflection spectrum versus pressure is linear, and the sensitivity reaches -5.083 nm/MPa at room temperature (20 °C) within the range of 0 - 4 MPa. The temperature sensitivity reaches 12.715 pm/°C within the range of 20 - 700 °C. The very low temperature-pressure cross-sensitivity of the two cavities indicates that the proposed FPI sensor offers great potential for simultaneous high-pressure and high-temperature measurements in harsh environments.

Hermetic Welding of an Optical Fiber Fabry-Pérot Cavity for a Diaphragm-Based Pressure Sensor Using CO2 Laser.

A diaphragm-based hermetic optical fiber Fabry-Pérot (FP) cavity is proposed and demonstrated for pressure sensing. The FP cavity is hermetically sealed using one-step CO2 laser welding with a cavity length from 30 to 100 µm. A thin diaphragm is formed by polishing the hermetic FP cavity for pressure sensing. The fabricated FP cavity has a fringe contrast larger than 15 dB. The experimental results show that the fabricated device has a linear response to the change in pressure, with a sensitivity of -2.02 nm/MPa in the range of 0 to 4 MPa. The results demonstrate that the proposed fabrication technique can be used for fabricating optical fiber microcavities for sensing applications.

Submillimeter-scale multimaterial terrestrial robots.

Robots with submillimeter dimensions are of interest for applications that range from tools for minimally invasive surgical procedures in clinical medicine to vehicles for manipulating cells/tissues in biology research. The limited classes of structures and materials that can be used in such robots, however, create challenges in achieving desired performance parameters and modes of operation. Here, we introduce approaches in manufacturing and actuation that address these constraints to enable untethered, terrestrial robots with complex, three-dimensional (3D) geometries and heterogeneous material construction. The manufacturing procedure exploits controlled mechanical buckling to create 3D multimaterial structures in layouts that range from arrays of filaments and origami constructs to biomimetic configurations and others. A balance of forces associated with a one-way shape memory alloy and the elastic resilience of an encapsulating shell provides the basis for reversible deformations of these structures. Modes of locomotion and manipulation span from bending, twisting, and expansion upon global heating to linear/curvilinear crawling, walking, turning, and jumping upon laser-induced local thermal actuation. Photonic structures such as retroreflectors and colorimetric sensing materials support simple forms of wireless monitoring and localization. These collective advances in materials, manufacturing, actuation, and sensing add to a growing body of capabilities in this emerging field of technology.

A novel NSDHL variant in CHILD syndrome with gastrointestinal manifestations and localized skin involvement.

BACKGROUND: CHILD syndrome is an X-linked dominant disorder associated with pathogenic mutations in the NSDHL gene. The condition is predominantly found in females as it is lethal in males. Most cases present at birth with extensive unilateral ichthyosiform erythroderma involving the trunk and limbs. Milder and less extensive presentations have been reported, leading to misdiagnosis especially during early childhood. METHODS AND RESULTS: We report an adult female of Malay ancestry who presented with minimal skin and limb involvement. She was only diagnosed in adulthood when she presented with gastrointestinal symptoms and worsening of skin manifestations. The clinical diagnosis was suspected after a combination of clinical, pathological and immunohistochemistry correlation, and molecularly confirmed with the discovery of a frameshift variant in NSDHL. The novel variant was inherited from her mother who had some linear hypopigmented patches over the medial aspects of both her arms and right forearm. CONCLUSION: We uncovered a novel frameshift variant associated with presentations that cast a new light on the clinical features of CHILD syndrome.

Continuous tuning of unidirectional emission wavelength by bending a notched-elliptical polymer microdisk.

An approach of continuously tunable unidirectional emission through bending a notched-elliptical polymer microdisk is proposed. The characteristics of the bending-dependent action are carefully analyzed, and the resonance wavelength for unidirectional emission can be tuned continuously through bending the device. Such a whispering-gallery-mode microresonator enables unidirectional emission with ultra-low divergence, of which the emission efficiency and Q factor are stabilized, demonstrating the whole structure is robust and relatively insensitive within a certain bending angle range. A maximum resonance wavelength shift of ∼100 nm and Q factor of 1500 can be achieved with the total size of the microdisk less than 10 µm. This kind of microresonator is promising for applications in multilevel integrated photonics circuits and may open the door to new functionalities of resonator devices, from sensing to optical amplification.